Operation Manual

1 Press the release button to the right to open the doors.
Make sure you open the doors fully.
2 Lift the blue locking levers completely.
3 Tilt the keg with the assembled tap unit towards you and take it out
of the appliance.
4 Press on the release buttons on both sides of the tap unit (1). The
tap unit is released from the keg with a click and you can remove it
(2).
You have to remove the tap unit from the keg before you can replace the
tube.
Always replace the tube when you install a new keg. Never use a tube for
more than 30 days.
5 Hold the tap unit over a sink.
ENGLISH 17