User manual
- Beige-wood brown model: (Fig. 12)
1 ’Green tea’ symbol: setting for heating up water to the required temperature for green tea and
white tea (70°C), green tea (80°C) or green tea and oolong tea (90°C)
2 ‘Black tea/herbal tea/redbush’ symbol: setting for heating up water to the required temperature
for black tea, fruit tea, herbal tea and redbush tea. Only at this setting, the water is boiled
(100°C).
Note: If you cannot set the desired temperature, the current temperature of the water in the kettle is
higher than the temperature you want to set. The current temperature is shown by the number of lights
that are on.
3 Presstheon/offbuttontoswitchontheappliance(Fig.6).
Note: If you do not press the on/off button within 10 seconds after setting the temperature, the set
temperature is lost.
, Whilethewaterheatsup,thecurrenttemperatureisshownbythenumberoflightsthatare
onandthelightofthesettemperatureashes.(Fig.13)
, Whenthekettlehasreachedthesettemperature,youhearanaudiblesignal(onebeep)and
thekettleswitchesoffautomatically.Thelightringaroundtheon/offbuttongoesoff.
, Thelightofthesettemperaturestaysonfor120secondstoletyouknowthewaterhasjust
reachedthepresettemperature.
You can adjust the set temperature while the kettle is operating. This is only possible if the
temperature of the water is still below the newly set temperature.
Note: If you remove the kettle from the base, the set temperature is lost.
You can use the keep-warm function to keep water warm at a temperature of 100°C (boiling
water)/90°C/80°C/40°C (or 100°C(boiling water)/90°C/80°C/70°C for the beige-wood brown
model).
There are two ways to keep water warm: at the current temperature, or at a temperature higher
than the current temperature.
Onlyusethekeep-warmfunctionwhenthereisatleast0.5lwaterinthekettle.Ifthereistoo
littlewaterinthekettle,thekettlemayswitchoffwithin30minutestoprotecttheheating
element.
1 Selectakeep-warmmethod.
1 Press the KEEP WARM button (Fig. 14).
Note: If the current temperature is lower than 80°C (or 70°C for the beige-wood brown model), you rst
have to set the temperature (see point B below).
, ThelightringsaroundtheKEEPWARMbuttonandtheon/offbuttongoontoindicatethat
thekeep-warmfunctionisactivated(Fig.15).
1 Press the SET TEMP button one or more times to set the desired temperature (see section
‘Setting the temperature’ in this chapter).
2 Press the KEEP WARM button (Fig. 14).
3 Press the on/off button.
, Whenthekettleheatsupthewatertokeepitattheselectedtemperature,thelightofthe
selectedtemperatureashes.
, Whenthewaterhasreachedtheselectedtemperature,thelightoftheselectedtemperature
lightsupcontinuously.
ENGLISH 9