Manual

6 Close the lid and lock the lever.
Note: Make sure you lock the lever properly. Push it down until it snaps home
with a click.
Note: Never ush the machine with the lid open. The lid must be properly
locked.
7 Put the plug in an earthed wall socket.
8 Put a bowl (with a capacity of at least 1500ml) under the coffee
spout to collect the water.
9 Press the on/off button I and subsequently press the 1-cup button
° and the 2-cup button °° briey at the same time.
, The boiler lls itself with water from the water reservoir. This takes
some time (approx. 90 to 150 seconds). The machine switches off
automatically when the ushing cycle ends. During the ushing cycle,
the machine produces more noise than during a regular brewing
cycle.
Note: Before you use the machine for the rst time, clean the coffee spout
and the pod holders with hot water and some washing-up liquid or in the
dishwasher. Clean the water reservoir thoroughly in hot water, if necessary with
some washing-up liquid.
Now your Philips SENSEO
®
coffee machine is ready for use.

1 Fill the water reservoir with cold water up to the indication
and put it back onto the machine.
Never pour milk, coffee, hot water or carbonated water into the water
reservoir.
- ° MIN: minimum amount of water required to brew 1 cup of
SENSEO
®
coffee.
- °° MIN: minimum amount of water required to brew 2 cups of
SENSEO
®
coffee.
- A full reservoir allows you to make SENSEO
®
coffee a number of
times (up to 5 cups (HD7810, HD7812) or up to 10 cups (HD7811).
This makes it unnecessary to ll the water reservoir each time you
want to make a cup of coffee.
CLICK
A
B
ENGLISH 9