User manual
2 Put the 1-cup pod holder ° or the 2-cup pod holder °° in the
machine without pod(s).
3 Put a bowl (with a capacity of at least 1500ml) under the coffee
spout to collect the water.
4 Press the on/off button I and subsequently press the 1-cup button
° and the 2-cup button °° briey at the same time.
The machine lls itself with water from the water reservoir. This takes some
time and you will probably not notice that this happens. After a while, the
machine starts to ush and switches itself off after the ushing cycle.
Descaling
Regular descaling prolongs the life of the coffee machine and guarantees
optimal brewing results for a long time. If you use the machine twice a day
on average, you must descale it once every 3 months.
1 Fill the water reservoir up to the MAX indication with descaler and
water according to the instructions on the package of the descaler.
Then put the water reservoir back onto the coffee machine.
Use a descaler based on citric acid.
2 Press on/off button I.
The machine is ready for use when the indicator light burns continuously.
3 Place the 1-cup pod holder ° in the coffee machine, preferably with
a used coffee pod in it. Close the lid and make sure it is properly
locked.
We advise you to put a used coffee pod in the pod holder when you
descale the machine. This pod serves as a ‘lter’ to prevent the sieve in the
pod holder from getting clogged with scale residues.
A
B
A
B
ENGLISH 25
4222.001.9743.3.indd 25 20-10-2008 12:00:34