HD7810 1 HD7811 HD7812, HD7810
3 4 6 7 8 K CLIC 422200197772 5 A 9 B 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 2/6
English Introduction With SENSEO®, you can enjoy a perfect cup of coffee with a delicious crema layer whenever you feel like it. Each cup is freshly brewed, so you’re always sure of a pure and round taste. SENSEO® combines a unique brewing method from Philips with convenient coffee pods from Moccona, available in different blends of fine roast and ground coffee. Together they make sure you only get the very best in flavour and aroma from the coffee.
- You can interrupt the brewing process at any time by pressing the on/off button I. If you switch the machine back on after you have interrupted the brewing process, the machine does not complete the interrupted brewing cycle. Do not remove the water reservoir during a brewing cycle, as this causes the machine to draw in air. When this happens, the next cup will only be partly filled.
Problem Solution The indicator light continues to blink slowly. You have not yet flushed the coffee machine (see chapter ‘Preparing the machine for use’. You have used the SENSEO® coffee machine at an altitude higher than 2200 metres above sea level. This has caused the water in the machine to start boiling before it has reached the required temperature. This prevents the machine from functioning properly. Switch off the machine and no longer use it at altitudes higher than 2200 metres above sea level.
Problem Solution you have placed the coffee pod(s) properly in the centre of the pod holder, to prevent water from escaping along the edge of the pod(s). When you use two coffee pods on top of each other, make sure that the convex sides of both pods point downwards and press the pods lightly into the pod holder; you have not used the same pod twice by accident; the coffee in the pod is evenly distributed; The SENSEO® coffee is too strong. The coffee is not hot enough.