operation manual

9
C
5 Put either the 1- or 2-pod holder in the machine without using
any coffee pod(s).
C
6 Close the lid and lock the lever.
B
Make sure the lever is properly locked by pushing it down until it snaps
home with a click.
B
Never flush the machine with the lid open! The lid must be properly
locked.
7 Put the plug into a 120V AC electrical outlet.
C
8 Put a bowl (with a capacity of at least 1.5 liters/1.6 qt.) under
the coffee outflow unit to collect the water.
C
9 Press on/off button I. Then press both the q and qq/w
buttons briefly at the same time.
◗ The machine will fill itself with water from the water reservoir.
This will take some time and you will probably not notice that
this is happening. After a while, the machine will start flushing and
it will switch itself off after the flushing cycle. During the flushing
cycle the machine produces more noise than during a regular
brewing cycle.
B
Before brewing coffee for the first time, clean the coffee outflow unit and
the pod holders with hot water and some dish soap or in a dishwasher.
Clean the water reservoir thoroughly in hot water, if necessary with some
dish soap.
◗ Now your Philips SENSEO
®
coffee machine is ready for use!
CLICK