Register your product and get support at www.philips.com/welcome HD7812, HD7811, HD7810, HD7805 2 3 4 6 7 8 K CLIC A 9 B 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 4222.200.0523.
English -- Introduction -- Congratulations on your purchase and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. With SENSEO®, you can enjoy a perfect cup of coffee with a delicious crema layer whenever you feel like it. Each cup is freshly brewed, so you’re always sure of a pure and round taste.
Filling the water reservoir Interrupting the brewing process 1 Fill the water reservoir with cold water up to the MAX indication and put it back onto the machine. (Fig. 3) Never pour milk, coffee, hot water or carbonated water into the water reservoir. ---- h MIN: minimum amount of water required to brew 1 cup of SENSEO® coffee. hh MIN: minimum amount of water required to brew 2 cups of SENSEO® coffee.
-- It prevents malfunctioning If the descaling procedure is not performed correctly, scale residue remains behind in the machine. This causes scale to build up more quickly and may cause permanent and irreparable damage to the machine. Use the correct descaling agent Only citric acid-based descalers are suitable for descaling the SENSEO® machine. This type of descaler descales the machine without damaging it. For the correct amount, see under ‘Descaling procedure’ below.
Problem Solution Make sure you do not move the SENSEO® machine. Moving the machine, placing it outdoors or in a cool or cold environment does not accelerate the unlocking of the lid. Do NOT put the SENSEO® machine in the fridge or freezer, as this does not accelerate the unlocking of the lid. If problems continue to occur, contact the Philips Consumer Care Centre in your country. The coffee machine produces less coffee than before. Perhaps the sieve in the centre of the pod holder is clogged.
---- --- ----- Benutzen Sie das Gerät nicht in Höhenlagen von über 2200 m. Das Gerät arbeitet nicht bei Temperaturen unter 10 °C. Spülen Sie die Kaffeepadmaschine vor dem ersten Gebrauch mit klarem Wasser durch (siehe Kapitel “Inbetriebnahme”). Auf diese Weise wird der Boiler mit Wasser gefüllt, was für den einwandfreien Betrieb der Maschine unbedingt erforderlich ist. Verwenden Sie keine natriumhaltigen Wasserenthärtungsmittel in Verbindung mit Ihrer SENSEO® Kaffeepadmaschine.
Nehmen Sie während der Zubereitung den Wasserbehälter nicht vom Gerät. Es würde sonst Luft einsaugen, und die nächste Tasse würde nicht ganz voll werden. Hinweis: Wenn das Gerät nur eine geringe Menge oder gar keinen Kaffee brüht, haben Sie es vor dem ersten Gebrauch nicht korrekt durchgespült, und der Boiler ist nicht oder nicht vollständig gefüllt. Spülen Sie das Gerät ordnungsgemäß durch (siehe Kapitel “Maschine für den Gebrauch vorbereiten”), bevor Sie eine neue Tasse Kaffee brühen.
Hinweis: Füllen Sie den Wasserbehälter nicht mit gebrauchtem heißem Wasser oder gebrauchter Entkalkermischung. Problem Lösung das Sieb in der Mitte des Padhalters nicht verstopft ist. Spülen Sie den Padhalter gegebenenfalls unter fließendem Wasser ab. Bei Bedarf können Sie das verstopfte Sieb auch mit einer Spülbürste oder einer Nadel säubern; 9 Füllen Sie den Wasserbehälter erneut bis zur Markierung MAX mit klarem Leitungswasser, und wiederholen Sie die Schritte 3 bis 6.
Problem Lösung die Kaffeepads richtig in der Mitte des Padhalters liegen, damit kein Wasser am Rand der Pads auslaufen kann.