Operation Manual

- If you have not used the coffee machine for some time, ush the
machine before you use it again (see section ‘Flushing the coffee
machine’ in chapter ‘Cleaning the machine’) with fresh water before
you use it again.
- If you intend to make another cup of SENSEO
®
coffee later, just leave
the coffee machine switched on. The machine automatically switches
off after 5 minutes.
Filling the water reservoir
1 Fill the water reservoir with cold water up to the MAX indication
and put it back onto the machine.
Never pour milk, coffee, hot water or carbonated water into the water
reservoir.
The MIN indication on the water reservoir indicated the minimum
amountofwaterrequiredforbrewingcoffee.Alwaysllthewater
reservoir beyond the MIN level.
Switching on the machine
1 Put the plug in an earthed wall socket.
2 Press the on/off button 3.
, Thelightringashesslowlywhilethewaterheatsup.Heatingup
takes approx. 75 seconds.
, The coffee machine is ready for use when the light ring lights up
continuously.
Note: If the light ring ashes rapidly, the water reservoir does not contain
enough water for brewing one cup of coffee.
Placing a pod holder
1 Release the lid by moving the lever upwards.
, The lid opens automatically.
2 Place the appropriate pod holder in the machine.
Note: Make sure the pod holder is clean and the sieve in the centre is not
clogged, e.g. with loose coffee grounds.
- If you want to make one cup of SENSEO
®
coffee, use 1 coffee pod in
combination with the 1-cup pod holder q and the 1- cup button q.
ENGLISH 11