User manual

- Pull at the tab on top of the milk container lid cover to open the cover.

- Pull out the steam inlet (this part stays attached to the lid by means of

a plastic strip)

Note: You can only pull the steam inlet out of the milk container lid when

the milk container lid cover is open.

3 Pull the milk tube off the milk container lid.

4 Clean the milk container, the milk container lid and the milk tube in

the dishwasher or with a washing-up brush in hot water with some

washing-up liquid. Rinse the parts with fresh water after cleaning.

Note: Cleaning in the dishwasher is recommended, especially when the milk

container is very dirty. In the dishwasher, all parts should be open or removed

as well.

5 Push back the steam inlet (1), connect the milk tube (2) and

close the milk container lid cover (3).

Note: Push back the steam inlet before you close the lid, otherwise the steam

inlet does not t anymore.

Note: Make sure you push the milk tube far enough onto the connector so that

the holes in the connector are covered.

18