Specifications

3 When the warning light ashes quickly, turn the control dial to the
hot water icon and wait a few seconds.
, The warning light goes out and some water comes out of the hot
water/steam wand or classic milk frother.
4 After a few seconds, when hot water stops coming out of the hot
water/steam wand and the warning light ashes slowly, turn the
control dial back to the coffee bean icon.
, The machine is heating up and the on/off button ashes slowly.
, When the machine has heated up, it performs an automatic rinsing
cycle to clean the internal circuit with fresh water. Water ows from
the coffee spout.
, When the on/off button lights up continuously, the machine is ready
for the manual rinsing cycle.
Note: You can stop the automatic rinsing cycle by pressing the espresso button
or the regular coffee button.
Note: The automatic rinsing cycle also takes place 15 minutes after the
appliance switches to standby mode or switches off.
Manual rinsing cycle
During the manual rinsing cycle, the machine brews one cup of coffee to
prepare the inner circuit for use.
1 Place a bowl under the coffee spout.
2 Make sure the on/off button lights up continuously.
3 Press the regular coffee button.
, The machine starts to brew a cup of coffee to prepare the inner
circuit for use. This coffee is not drinkable.
4 Empty the bowl after the brewing cycle is nished.
ENGLISH 11