Specifications

Descaling procedure
The descaling procedure lasts 30 minutes and consists of a descaling cycle
and a rinsing cycle.
Preparation
1 Switch off the machine.
If you do not switch off the machine, you cannot enter the descaling cycle.
2 Empty the drip tray and place it back. Remove the classic milk
frother (if present).
3 Empty the water tank and remove the Intenza+ water lter
(if present). Pour the entire bottle of descaling solution into the
water tank.
4 Add water to the descaling solution in the water tank up to the
MAX indication.
5 Make sure the control dial is set to the coffee bean icon.
6 Place a bowl under the hot water/steam wand.
Descaling cycle
1 Press the espresso button and regular coffee button simultaneously
for approximately 5 seconds.
, The orange descaling light ashes slowly during the entire descaling
cycle.
2 Turn the control dial to the hot water icon and brew hot water.
Let hot water ow out of the hot water/steam wand for 10 seconds.
ENGLISH 21