Specifications

7 Remove the drip tray, rinse it and place it back.
8 Reattach the classic milk frother.
9 Remove the water tank and rinse it.
10 Reinstall the Intenza+ water lter (if present).
11 Fill the water tank with fresh tap water up to the MAX indication
and slide the water tank back into the machine.
12 Press the on/off button to switch off the machine.
, When you switch the machine back on, it is ready for use again.
If you are unable to nish the descaling procedure
If the machine gets stuck in the descaling procedure, you can press the
on/off button.This allows you to complete the descaling procedure. Follow
the steps below to make sure your machine is ready to brew coffee again.
1 Press the espresso button and regular coffee button simultaneously
for approximately 5 seconds.
2 Remove the drip tray, rinse it and place it back.
3 Remove the water tank and rinse it.
4 Fill the water tank with fresh tap water up to the MAX indication
and slide the water tank back into the machine.
5 Press the espresso button and brew a cup of espresso. Repeat this
twice.
6 Turn the control dial to the hot water icon. Let hot water ow out
of the hot water/steam wand until the ‘water tank empty’ light lights
up continuously.
7 Remove the drip tray, rinse it and place it back.
8 Reattach the classic milk frother.
9 Remove the water tank and rinse it.
10 Reinstall the Intenza+ water lter (if present).
11 Fill the water tank with fresh tap water up to the MAX indication
and slide the water tank back into the machine.
12 Press the on/off button to switch off the machine.
, When you switch the machine back on, it is ready for use again.
Meaning of light signals
- The on/off button lights up continuously. The machine is ready for use.
ENGLISH 23