Specifications
Problem Solution
Brew a few cups of coffee to let the machine adjust itself to the new
grinding settings.
Use a different type of coffee beans.
Water ends up in the drip
tray.
This is normal. To guarantee the perfect cup of coffee, the machine uses
water to rinse the internal circuit and brewing unit. Some of the water
ows through the internal system directly into the drip tray. Empty the
drip tray regularly.
The machine seems to be
leaking.
The drip tray is full and overowed during brewing or the descaling
procedure.
Check if the water tank is leaking.
The brewing unit or the drains behind or under the brewing unit may be
blocked. Rinse the brewing unit with lukewarm water and clean the upper
lter carefully. Also clean the inside of the machine with a soft, damp cloth.
There is not enough coffee
in my cup.
Air may be present in the internal circuit. Rinse the internal circuit of the
machine by turning the control dial to the hot water icon and letting
some hot water ow out of the machine.
Clean the brewing unit (see chapter ‘Cleaning and maintenance’, section
‘Cleaning the brewing unit’).
Technical specications
Feature Value / location
Nominal voltage Inside of maintenance door
Power rating Inside of maintenance door
Size (w x h x d) 295mm x 325mm x 420mm
Weight 6.9 kg
Material Plastic
Cord length 0.8m -1.2m
Water tank capacity 1000ml
Cup size Up to 95mm
Coffee bean container capacity 170g
Coffee grounds container capacity 8 cakes
Pump pressure 15 bar
Boiler Stainless steel
Safety devices Thermal fuse
ENGLISH28