operation manual

There is not enough coffee in my

cup.

There is no water in the

internal circuit.

Air may be present in the internal circuit.

Rinse the internal circuit of the machine

by turning the control dial to the hot

water icon and letting some hot water

flow out of the machine.

The cup volume has

been changed.

Set with the memo function the cup

volume.

The brew group is dirty. Clean the brew group (see chapter

‘Cleaning and maintenance’, section

‘Cleaning the brew group’).

The milk does not froth. The automatic milk

frother is dirty or not

assembled or installed

correctly.

Clean the automatic milk frother and

make sure it is correctly assembled or

installed.

The type of milk used is

not suitable for frothing.

Different types of milk result in different

amounts of froth and different froth

qualities. Semi-skimmed or full-fat

cow's milk give good results.

Recycling

This symbol means that this product shall not be disposed of with normal

household waste (2012/19/EU).

Follow your country's rules for the separate collection of electrical and

electronic products. Correct disposal helps prevent negative

consequences for the environment and human health.

Guarantee and support

If you need information or support, please visit www.saeco.com/support or

read the separate guarantee leaflet.

If you need information or support, please contact the Philips Saeco hotline

in your country. Contacts are included in the warranty booklet supplied

separately or visit www.saeco.com/support.

Ordering maintenance products

Intenza+ water filter (CA6702)

Lubricant (HD5061)

Descaling solution (CA6700)

English