operation manual

Installing the Intenza+ water filter

We advise you to install the Intenza+ water filter as this prevents scale

build-up in your machine. You can buy the Intenza+ water filter separately.

For more details, see chapter ‘Guarantee and support’, section ‘Ordering

maintenance products’.

1 Remove the small white filter from the water tank and store it in a dry

place.

Note: Please keep the small white filter for future use. You will need it for

the descaling process.

2 Remove the filter from its packaging and immerse it in cold water with the

opening pointing upwards. Press the sides of the filter gently to let out

the air bubbles.

3 Turn the knob of the filter to the setting that corresponds to the water

hardness of the area you live in.

a Very soft water/ soft water

b Hard water (default)

c Very hard water

Note: You can test the water hardness with a water hardness test strip.

4 Place the filter in the empty water tank. Press it down until it cannot

move any further.

5 Fill the water tank with fresh water up to the MAX indication and slide it

into the machine.

6 Let the machine brew hot water until the water tank is empty (see

chapter ‘Using the machine’, section ‘Hot water’).

7 Refill the water tank with fresh water up to the MAX indication and slide it

back into the machine.

The on/off button lights up continuously.

The machine is ready for use.

Using the machine

To guarantee perfect espresso, the machine regularly rinses its inner circuit

with water. This automatic rinsing cycle takes place 60 minutes after the

appliance switches to standby mode or switches off. During the automatic

English