User manual

Descaling cycle

5 sec

1 Press the espresso button and cappuccino button simultaneously for

approximately 5 seconds.

The orange descaling light flashes slowly during the entire descaling

cycle.

2 Turn the control dial to the hot water icon and brew hot water. Let hot

water flow out of the hot water/steam wand for 10 seconds.

3 Turn the control dial back to the single bean icon.Wait approximately 1

minute to let the descaling solution act.

4 Press the espresso button to brew a cup of espresso.Wait approximately

1 minute to let the descaling solution act.

Note: During the descaling process, the coffee grinding function does not

work.If you press the espresso button, only water will flow out of the

machine.

5 Repeat steps 2 to 4 until the ‘water tank empty’ light lights up

continuously.

Rinsing cycle

1 Remove the water tank from the machine and rinse it.

2 Fill the water tank with fresh tap water up to the MAX indication and slide

the water tank back into the machine.

3 Empty the big cup and place it back onto the drip tray under the hot

water/steam wand.

4 Press the espresso button and brew a cup of espresso. Repeat this twice.

English