Operation Manual

63 ENGLISH 63
Preparation Phase
To perform the descaling cycle, follow the steps below.
Before descaling:
1
1 - Raise the co ee dispensing spout;
2 - Press the side buttons;
3 - Remove and empty the drip tray and the co ee grounds drawer,
then place them back.
2
Fill the milk carafe with water up to the MIN level and insert it into the
machine.
Yellow
3
Press the “ ” button until this display is shown.
4
Press the “ ” button to start the descaling process.
Note:
If the "
"button is pressed by mistake, press the " " button to quit.
5
The machine reminds you to insert the carafe and pull out the carafe
dispensing spout by showing the following icons.
YellowYellowYellow
3
1
2
2