Operation Manual

74 ENGLISH
Warning Signals (Yellow Colour)
The machine is warming up.
The machine is performing the rinse cycle. Wait until the machine has com-
pleted the cycle.
The machine needs the "INTENZA+" water  lter to be replaced.
The brew group is being reset due to machine reset.
Fill the co ee bean hopper with co ee beans and restart the cycle.
Prime the water circuit.
You need to descale the machine. Press the “ ” button to start the descaling
process. Follow the steps described in the “Descaling” chapter of this manual.
If you want to descale the machine later, press the “
” button to continue
using the machine.
Please note that not descaling your machine will ultimately make it stop
working properly. In this case, repair is NOT covered under your warranty.
Ready Signals (Green Colour)
Insert the water dispensing spout and press the “ ” button to start
dispensing.
Press “
” to exit.
The machine is warming up to dispense beverages.