operation manual

73 ENGLISH 73
Machine actions Causes Solutions
Co ee is too weak
(see note).
This might occur when the ma-
chine is automatically adjusting
the dose.
Brew a few cups of co ee as
described in the “Saeco Adapting
System” chapter.
Co ee is too coarse. Change co ee blend or adjust
grinding as explained in the “Adjust-
ing the Ceramic Co ee Grinder”
chapter.
Co ee does not have enough
crema
(see note).
The blend is unsuitable, co ee is
not freshly roasted or the grind is
too coarse.
Change co ee blend or adjust
the grind setting as explained in
the “Adjusting the Ceramic Co ee
Grinder” chapter.
No co ee is brewed, co ee
is brewed slowly or drop by
drop (see note).
The co ee grind is too  ne. Change co ee blend or adjust
grinding as explained in the “Adjust-
ing the Ceramic Co ee Grinder”
chapter.
The circuit is not primed. Prime the circuit (see the "Using the
Machine for the First Time" chapter).
The brew group is dirty. Clean the brew group (see the
"Weekly Cleaning of the Brew
Group" chapter).
The dispensing spout is dirty. Clean the dispensing spout and its
holes.
The machine circuit is clogged by
limescale.
Descale the machine.
Co ee leaks out of the co ee
dispensing spout.
The co ee dispensing spout is
clogged.
Clean the co ee dispensing spout
and its holes.
No hot water or steam is
dispensed.
The hole of the steam/hot water
wand is clogged.
Clean the hole of the steam wand
using a pin.
Make sure that the machine is
o and has cooled down before
performing this operation.
The circuit is not primed. Prime the circuit (see the “Using the
Machine for the First Time” chapter).
The machine circuit is clogged by
limescale.
Descale the machine.
Milk does not froth. The Automatic Milk Frother is in-
serted too deep. No milk is being
suctioned.
Leave the Automatic Milk Frother to
cool down. Move it slightly down-
wards. Reposition it in its correct
seat.