operation manual

74 ENGLISH
Note:
These problems can be considered normal if the co ee blend has been
changed or if the machine has just been installed. In this case, wait until
the machine performs a self-adjusting operation as described in the "Saeco
Adapting System" chapter.
Machine actions Causes Solutions
Frothed milk is too cold. The cups are cold. Preheat the cups with hot water.
The descaling cycle cannot
be completed.
The water dispensed for the rinse
cycle is not enough.
Press the on/o button and follow
the instructions described in the
“Interruption of the Descaling Cycle”
section.
The selected product was not
saved.
You exited the setting of the prod-
uct via the “
” icon.
You need to con rm and save the de-
sired product quantity via the “
” icon.