operation manual

62 ENGLISH
Warning Signals (Yellow Colour)
The machine is warming up.
The machine is performing the rinse cycle. Wait until the machine has com-
pleted the cycle.
The machine needs the "INTENZA+" water  lter to be replaced.
The brew group is being reset due to machine reset.
Re ll the co ee bean hopper with co ee beans.
Prime the circuit.
You need to descale the machine. Press the “ ” button to start the descaling
process. Follow the steps described in the “Descaling” chapter of this manual.
If you want to descale the machine later, press the “
” button to continue
using the machine.
Please note that not descaling your machine will ultimately make it stop
working properly. In this case, repair is NOT covered under your warranty.