User Guide
12 ENGLISH
6 Turn the timer knob to the required cooking time to switch on the
appliance.
Note
• Refer to the food table with basic cooking settings for dierent types of food.
Tip
• During cooking, if you need to change the cooking temperature or time, turn
the control knobs to the required setting.
Note
• Some ingredients require shaking or turning halfway through the cooking time
(see ‘Food table’). To shake the ingredients, pull out the pan with the basket,
place it on a heat resistant work top, slide the lid and press the basket release
button to remove the basket and shake the basket over the sink. Then put the
basket into the pan, and slide them back into the appliance.
• If you set the timer to the half of the cooking time and you hear the timer bell
it is time to shake or turn the ingredients. Be sure to reset the timer to the
remaining cooking time.
7 When you hear the timer bell, the cooking time has elapsed.
Note
• You can also switch o the appliance manually. To do this, turn the timer knob
to 0 (counterclockwise); this requires some more force than turning clockwise.
8 Pull out the pan and check if the ingredients are ready.
Caution
• The Airfryer pan is hot after the cooking process. Always place it on a heat
resistant work top (eg. trivet, etc.) when you remove the pan from the device.
Note
• If the ingredients are not ready yet, simply slide the pan back into the Airfryer
by the handle and add a few extra minutes.
9 To remove small ingredients (e.g. fries), lift the basket out of the pan
by sliding the lid rst, and then pressing the basket release button.
Caution
• After the cooking process, the pan, the basket, the interior housing and the
ingredients are hot. Depending on the type of ingredients in the Airfryer,
steam may escape from the pan.