operation manual

22 ENGLISH
Replacing the “INTENZA+” Water Filter
When the “INTENZA+” water  lter needs to be replaced, the “ ” icon is
displayed.
1
Replace the  lter as described in the previous chapter.
2
The machine is now programmed to manage a new  lter.
Note:
If the  lter is already installed and you want to remove, but not replace it,
select the “ENABLE FILTER” option and set it on OFF.
If there is no “INTENZA+” water  lter installed, insert the small white  lter
previously removed into the water tank.
14
The machine starts dispensing water. This screen will be displayed. At
the end of the operation, remove the container.
ACTIVATE FILTER
15/01/15
10:38
3
OFF
WATER HARDNESS
ENABLE FILTER
ACTIVATE FILTER
2.4. WATER SETTINGS