operation manual
38
ENGLISH
Adjusting the Cappuccino Length
Each time the “ ” button is pressed, the machine dispenses a pre-
set quantity of cappuccino into the cup.
The machine allows you to adjust the amount of cappuccino according to
your taste and the size of your cups.
1
Fill the carafe with milk and place it into the machine.
2
Place a cup under the dispensing spout and open the carafe dispens-
ing spout by rotating it clockwise.
3
Press and hold the “ ” button until the “ ” icon is displayed.
Then release the button.
The machine is now in programming mode.
9
Remove the cup and close the milk dispensing spout by turning it
counter clockwise.
10
Wait for a few seconds. The machine starts the automatic cleaning
cycle (see the "Cleaning and Maintenance" chapter).
11
Wait until the end of the cleaning cycle, remove the milk carafe and
place it in the refrigerator.
8
Once the milk froth has been dispensed, the machine brews co ee.
Brewing can be stopped earlier by pressing the
“ ”
button.
CAPPUCCINO