operation manual

82
ENGLISH
20
The descaling cycle has been completed.
Note:
At the end of the descaling cycle, wash the brew group as described in the
“Weekly Cleaning of the Brew Group chapter.
The rinse cycle is performed in order to have the circuit cleaned with a
preset amount of water to ensure proper machine performance. If the
water tank is not  lled up to MAX level, the machine could require two or
more cycles.
15
When the amount of water needed for the rinse cycle has been
completely dispensed, the machine automatically ends the descaling
process by showing this display after a short warm-up phase.
16
Remove and empty the container.
17
Disassemble and wash the milk carafe as described in the Weekly
Cleaning of the Milk Carafe chapter.
18
Empty the (internal) drip tray and place it back.
19
Place the “INTENZA+” water  lter (if installed) back into the water tank.
15/01/15
10:38