User Guide

ENGLISH

Cooking with Smart Chef programs

Season your ingredients as desired. Put the food inside the basket and

slide the basket inside the appliance.

Note

• Do not use honey, syrups or any other sugary ingredients to season your food,

since the browning will get very dark.

1 Press the On/O button to switch on the appliance.

2 To change the Smart Chef program, turn the QuickControl dial until the

desired icon is blinking.

3 To conrm the Smart Chef program, press the QuickControl dial.

» The appliance automatically calculates the ideal cooking

temperature and time. The screen displays the rst estimated

cooking temperature and time after a few minutes. During this

time the appliance has already started cooking. As long as the

screen displays the blinking bars and the temperature/time

alternately, the appliance is still calculating the cooking time, and

the appliance will automatically adjust the time during cooking.

Note

• To prepare a whole chicken, weigh the chicken before placing it in the basket.

Choose the weight by turning the QuickControl dial and pressing it to conrm.

• Do not pull out the drawer as long as the appliance is calculating the cooking

time, which is indicated by blinking bars on the display. Otherwise the Smart

Chef program will stop, and the appliance will reset to the main menu. Proceed

cooking with the manual mode because restarting the Smart Chef program

with partially cooked food will lead to a wrong estimation of the cooking time.

• As soon as the calculation phase is nished you will see the temperature and

time displayed continuously (without blinking bars), and you may open the

drawer to check the status of the food.

4 When you hear the bell and see the shake indication blinking, open

the drawer and turn the ingredients or shake the basket with the

ingredients. Then slide the basket back into the appliance.