User Manual

23
ENGLISH
Problem Possible cause Solution
After starting a Smart
Chef program the
appliance stopped
the calculation phase.
The cooking chamber
temperature is too high
either because the appliance
is pre-heated or has not
cooled down suciently
between two batches.
Keep the drawer open for some minutes to
cool it down. Close it and start the Smart Chef
program again.
The drawer is opened during
the calculation phase.
Close the drawer and proceed cooking with the
manual mode.
The drawer is not closed
properly.
Make sure that the drawer is closed properly.
The appliance has
stopped cooking
with the Smart Chef
program.
The drawer is opened during
the calculation phase.
Do not pull out the drawer as long as the
appliance is calculating the cooking time, which
is indicated by blinking bars on the display.
I see some peeling
o spots inside my
Airfryer.
Some small spots can
appear inside the pan of the
Airfryer due to the incidental
touching or scratching of the
coating (e.g. during cleaning
with harsh cleaning tools
and/or while inserting the
basket).
You can prevent damage by lowering the basket
into the pan properly. If you insert the basket at
an angle, its side may knock against the wall of
the pan, causing small pieces of coating to chip
o. If this occurs, please be informed that this is
not harmful as all materials used are food-safe.
White smoke comes
out of the appliance.
You are cooking fatty
ingredients and the fat
reducer is not put in the pan.
Carefully pour o any excess oil or fat from the
pan, place the fat reducer in the pan and then
continue cooking.
The pan still contains greasy
residues from previous use.
White smoke is caused by greasy residues
heating up in the pan. Always clean the pan,
basket and fat reducer thoroughly after every
use.
Breading or coating did not
adhere properly to the food.
Tiny pieces of airborne breading can cause
white smoke. Firmly press breading or coating to
food to ensure it sticks.
Marinade, liquid or meat
juices are splattering in the
rendered fat or grease
Pat food dry before placing it in the basket.
My display shows 5
dashes as illustrated
in the picture below.
This is an error code. 1. Unplug the appliance and let it rest for 5
minutes before plugging in again.
2. If your display still shows the dashes, call
the Philips service hot line or contact the
Consumer Care Center in your country.