User Guide
16 ENGLISH
3 Empty the bowl and dry the potato sticks with a dish towel or paper towel.
4 Pour 1–3 tablespoons of cooking oil in the bowl, put the sticks in the bowl and mix
until the sticks are coated with oil.
5 Remove the sticks from the bowl with your ngers or a slotted kitchen utensil so
excess oil remains in the bowl.
Note
• Do not tilt the bowl to pour all the sticks in the basket at once to prevent excess oil
from going into the pan.
6 Put the sticks in the basket.
7 Start the Smart Chef program for home-made fries. When shaking of the fries is
needed, you will hear the timer bell and see the blinking shaking icon on the display.
Note
• Consult the chapter “Food table for Smart Chef programs” for the right quantities.
Choosing the keep warm mode
1 Press the keep warm button (you can activate the keep warm mode at any time).
(Fig. 28)
» The keep warm indication lights up with pulsing eect.
» The keep warm timer is set to 30minutes. To change the keep warm time (1–30
min), press the timer button, turn the QuickControl dial and then push it to
conrm (Fig. 29). You cannot adjust the keep warm temperature.
2 To pause the keep warm mode, push the QuickControl dial. To resume the keep
warm mode, push the QuickControl dial again.
3 To exit the keep warm mode, press the return button or the On/O button.
Tip
• If food like French fries loses too much crispness during the keep warm mode,
either shorten the keep warm time by switching o the appliance earlier or crisp
them up for 2-3 minutes at the temperature of 350°F/180°C.
Note
• If you activate the keep warm mode during cooking (the keep warm indication
lights up), the appliance will keep your food warm for 30 minutes after the cooking
time has elapsed.
• During the keep warm mode, the fan and heater inside of the appliance turn on
from time to time.
• The keep warm mode is designed to keep your dish warm immediately after it is
cooked in the Airfryer. It is not meant for reheating.