DVD Recorder User Manual
Table Of Contents
- Functioning of the device
- Overview of functions 2 The remote control
- Front of the device
- Back of the device
- Discs you can use
- Regional code
- Technical data
- Accessories
- Important
- Symbols used in these operating instructions
- Cleaning the discs
- Special functions of your DVD recorder
- Preparing the remote control for operation
- Connecting to the antenna
- Connecting to the TV
- Connecting to the AC-outlet
- Connecting a video recorder, DVD player.
- Connecting a cable box with cinch or S-video cable
- Connecting a cable box only via antenna cable
- Connecting a camcorder to the front jacks
- Connecting audio devices to the analog audio jacks
- Connecting audio devices to the digital audio jacks
- Initial installation
- Tuner mode
- Automatic TV channel search
- Adding and clearing TV channels manually
- Setting the language
- Setting the time and date automatically
- Setting the time and date
- General information
- Setting up the TV Guide On Screen System
- Finalize set-up
- The TV Guide On ScreenSystem
- The ' LISTINGS ' screen
- The ' SORT ' screen
- The ' SCHEDULE ' screen
- The ' MESSAGES ' screen
- The ' PROMOTIONS ' screen
- The ' SETUP ' screen
- General
- The Time shift Buffer
- Manual recordings
- Recording from a video recorder/DVD player
- Recording from a camera connected to the front jacks
- General
- Programming recordings with the 'TV Guide On Screen system'
- Programming recordings with the VCR Plus+ ® System
- Programming recordings without the VCR Plus+ ® System
- How to change or delete a programmed recording (TIMER)
- Cancel a programmed recording in progress
- General
- Additional playback features
- The media browser
- Edit title
- Editing recorded titles (name)
- Divide title
- Delete titles/recordings from the HDD
- Insert/remove chapter markers
- Hide chapters (sections)
- Archiving (storing) titles on a DVD+RW/+R
- Protect disc against accidental recordings
- General notes on playback
- Inserting a disc
- Playing a DVD video disc
- Playing a DVD+RW/ +R disc
- Playing an audio CD
- Playing an MP3 CD
- Playing a (Super) Video CD
- General
- Searching a disc
- Still picture
- Slow motion
- Search by time
- ENGLISH Additonal playback features 51 Repeat/Shuffle play
- Scan feature
- Camera angle
- Zoom feature
- Select the audio language
- Subtitles
- General
- Favorite Scene Selection
- Editing recording titles (name)
- Playing the entire title
- Erasing recordings/titles
- Disc settings
- General information
- Adding a disc to the Disc Manager
- Removing discs from the Disc Manager
- Disc Manager (DM) 60 Searching for a title in the Disc Manager
- Searching discs
- General
- Toolbar
- ' Audio '
- ' Zoom '
- ' Time search '
- ' Subpictures '
- Preferences
- ' Record mode '
- ' Camera mode '
- ' Chapters '
- ' HDD buffer '
- ' Language '
- ' Filter '
- ' Set up '
- ' Auto delete '
- ' Jump forward '
- ' Jump back '
- ' Installation '
- ' Flush Buffer '
- General
- Picture settings
- Sound settings
- Language settings
- Additional settings
- Disk feature menu
- Child lock (DVD and VCD)
- Parental level control (DVD video only)
- Changing the PIN code
- Symbols in the menu bar
- Field for temporary messages
- Status field
- The symbols on your DVD recorder display
- Messages in the DVD recorder display
12
Preparing the remote control for
operation
The remote control and its batteries are packed separately in the
original DVD recorder packaging. You must install the batteries in the
remote control before use - described in the following section.
1 Take the remote control and the enclosed batteries (2 batteries).
2 Open the battery compartment, insert the batteries as shown and
then close the battery compartment. Match the polarities (+ and -)
on the batteries with the diagram on the remote.
The remote control is now ready to use.
Its range is approximately 5 to 10 meters.
'Aim' correctly
Aim the remote control at the DVD recorder and not at the TV set.
Using your DVD<Recorder remote control
with your TV set
With the enclosed multicode remote control you can control the main
functions of your TV set. To do this, you must first enter a code
number that corresponds to the make of your TV set.
You will find a summary of all available remote control codes on the
last page of this manual.
1 Hold down the STANDBY m button.
2 Using the number buttons 0..9 , enter the code number that
corresponds to the make (manufacturer) of your TV set.
3 When you have entered the code number check, that the TV set
will responds to the TV VOLUME r or TV
VOLUME q buttons.
a My TV set will not react
b Also try to enter the other code numbers or that of other
manufacturers.
b In some cases, it is possible that your TV set will not react to the
selected code numbers. If this is the case, you unfortunately cannot
use this function.
4 You can select one of the following functions:
TV VOLUME q increase the TV volume
TV VOLUME r decrease the TV volume
For the following functions you need to hold down the •
TV button (on the left side) and then select the function you need
with the appropriate button.
TV/MUTE y switch off sound
STANDBY m switch off the TV set
CHANNEL q next channelr
CHANNEL r previous channelr
Additionally on Philips TV-sets:
T/C switch Teletext (TXT) on/off
TIMER s Clock display on the screen on/off
RETURN To return to the previous menu step
SYSTEM MENU Call up the System Menu from the TV
B , A In the menus cursor up/down
D , C In the menus cursor left/right
OK Confirm functions or settings
Color buttons Buttons for special functions
TUNER Switchng the TV from the external jacks to
the internal tuner (TV channels).
Connecting to the antenna
To receive TV programs you have to connect the DVD-recorder to
the antenna or the cable network.
1 Switch off your TV set.
2 Remove the antenna or cable TV signal from your TV. Insert it into
the ANTENNA IN jack at the back of the DVD Recorder.
3 Insert one end of the supplied antenna cable into the TV
OUT jack at the back of the DVD Recorder and the other end
into the antenna input jack at the back of the TV.
The TV's Antenna In jack may be labeled ANT IN, RF IN, 75 ohm,
etc. Check your TV instructions for details.
ENGLISH
Connecting the DVD recorder