DVD Recorder User Manual
Table Of Contents
- Functioning of the device
- Overview of functions 2 The remote control
- Front of the device
- Back of the device
- Discs you can use
- Regional code
- Technical data
- Accessories
- Important
- Symbols used in these operating instructions
- Cleaning the discs
- Special functions of your DVD recorder
- Preparing the remote control for operation
- Connecting to the antenna
- Connecting to the TV
- Connecting to the AC-outlet
- Connecting a video recorder, DVD player.
- Connecting a cable box with cinch or S-video cable
- Connecting a cable box only via antenna cable
- Connecting a camcorder to the front jacks
- Connecting audio devices to the analog audio jacks
- Connecting audio devices to the digital audio jacks
- Initial installation
- Tuner mode
- Automatic TV channel search
- Adding and clearing TV channels manually
- Setting the language
- Setting the time and date automatically
- Setting the time and date
- General information
- Setting up the TV Guide On Screen System
- Finalize set-up
- The TV Guide On ScreenSystem
- The ' LISTINGS ' screen
- The ' SORT ' screen
- The ' SCHEDULE ' screen
- The ' MESSAGES ' screen
- The ' PROMOTIONS ' screen
- The ' SETUP ' screen
- General
- The Time shift Buffer
- Manual recordings
- Recording from a video recorder/DVD player
- Recording from a camera connected to the front jacks
- General
- Programming recordings with the 'TV Guide On Screen system'
- Programming recordings with the VCR Plus+ ® System
- Programming recordings without the VCR Plus+ ® System
- How to change or delete a programmed recording (TIMER)
- Cancel a programmed recording in progress
- General
- Additional playback features
- The media browser
- Edit title
- Editing recorded titles (name)
- Divide title
- Delete titles/recordings from the HDD
- Insert/remove chapter markers
- Hide chapters (sections)
- Archiving (storing) titles on a DVD+RW/+R
- Protect disc against accidental recordings
- General notes on playback
- Inserting a disc
- Playing a DVD video disc
- Playing a DVD+RW/ +R disc
- Playing an audio CD
- Playing an MP3 CD
- Playing a (Super) Video CD
- General
- Searching a disc
- Still picture
- Slow motion
- Search by time
- ENGLISH Additonal playback features 51 Repeat/Shuffle play
- Scan feature
- Camera angle
- Zoom feature
- Select the audio language
- Subtitles
- General
- Favorite Scene Selection
- Editing recording titles (name)
- Playing the entire title
- Erasing recordings/titles
- Disc settings
- General information
- Adding a disc to the Disc Manager
- Removing discs from the Disc Manager
- Disc Manager (DM) 60 Searching for a title in the Disc Manager
- Searching discs
- General
- Toolbar
- ' Audio '
- ' Zoom '
- ' Time search '
- ' Subpictures '
- Preferences
- ' Record mode '
- ' Camera mode '
- ' Chapters '
- ' HDD buffer '
- ' Language '
- ' Filter '
- ' Set up '
- ' Auto delete '
- ' Jump forward '
- ' Jump back '
- ' Installation '
- ' Flush Buffer '
- General
- Picture settings
- Sound settings
- Language settings
- Additional settings
- Disk feature menu
- Child lock (DVD and VCD)
- Parental level control (DVD video only)
- Changing the PIN code
- Symbols in the menu bar
- Field for temporary messages
- Status field
- The symbols on your DVD recorder display
- Messages in the DVD recorder display
16
Connecting a camcorder to the front
jacks
To copy camcorder recordings, you can use the front jacks. These
jacks are behind the door in the lower right corner of the front panel.
Recordings from the front jacks were stored on the HDD to make
editing easy. Then you can transfer (archive) them on a DVD+RW/+R.
Digital (DV) input jack
If you are using a Digital Video or Digital 8 camcorder, connect the
DV IN (CAM2) IN jack of the DVD Recorder to the corresponding
DV OUT jack on the camcorder.
Choose 'CAM2' as a program number for this input.
When films are transferred, the original recording date and time are stored
as DVD subtitles.
During playback, you can display this data on the TV screen by using the
'Subpicture' function.
S<video input jack
If you are using a Hi8 or S-VHS(C) camcorder, connect the S-VIDEO
(CAM1) in jack of the DVD Recorder to the corresponding S-video
out jack on the camcorder.
You must also connect the L AUDIO R (CAM1) in jacks of the DVD
Recorder to the audio out jacks on the camcorder.
Choose 'CAM1' as a program number for this input.
Video (CVBS) input jack
If your camcorder only uses a video output (Composite Video or
CVBS), connect the VIDEO (CAM1) input of the DVD Recorder to
the corresponding output jack on the camcorder.
You must also connect the L AUDIO R (CAM1) in jacks of the DVD
Recorder to the audio out jacks on the camcorder.
Choose 'CAM1' as a program number for this input.
Connecting audio devices to the analog
audio jacks
There were two analog audio output jacks AUDIO L/R (OUT
2) (audio signal output left/right) and two audio input jacks AUDIO
L/R (IN-EXT 2) (audio input left/right) on the back of the DVD
Recorder.
These can be used to connect the following devices:
•) A receiver with Dolby Surround Pro Logic
•) A receiver with two<channel analog stereo
Can I use the 'Phono' input on my amplifier?
This amplifier jack (input) should only be used for record players without a
pre-amplifier. Do not use this input jack to connect the DVD Recorder.
This could damage the DVD Recorder or the amplifier.
Connecting audio devices to the digital
audio jacks
The back of the DVD Recorder features two digital audio output jacks
OPTICAL OUT for an optical cable and COAX OUT for a coaxial
cable (cinch cable).
It can be used to connect the following devices:
•) an Audio/Video receiver or an Audio/Video amplifier with a
digital multi<channel sound decoder
•) a receiver with two<channel digital stereo (PCM)
Digital multi-channel sound
Digital multi-channel sound provides maximum sound quality. You will
need a multi-channel A/V receiver or amplifier that supports at least
one of the audio formats of the DVD recorder (MPEG2 and Dolby
Digital).
Consult the owner's manual of your receiver to find out which audio
formats it supports.
a A loud distorted sound is coming from my speakers
b The receiver does not support the digital audio format of the DVD
Recorder. The audio format of the inserted DVD is displayed in the
display panel when another language is switched on. Playback using
6-channel digital surround sound is only possible when the receiver
has a digital multi-channel sound decoder.
ENGLISH
Connecting additional devices