DVD Recorder User Manual
Table Of Contents
- Functioning of the device
- Overview of functions 2 The remote control
- Front of the device
- Back of the device
- Discs you can use
- Regional code
- Technical data
- Accessories
- Important
- Symbols used in these operating instructions
- Cleaning the discs
- Special functions of your DVD recorder
- Preparing the remote control for operation
- Connecting to the antenna
- Connecting to the TV
- Connecting to the AC-outlet
- Connecting a video recorder, DVD player.
- Connecting a cable box with cinch or S-video cable
- Connecting a cable box only via antenna cable
- Connecting a camcorder to the front jacks
- Connecting audio devices to the analog audio jacks
- Connecting audio devices to the digital audio jacks
- Initial installation
- Tuner mode
- Automatic TV channel search
- Adding and clearing TV channels manually
- Setting the language
- Setting the time and date automatically
- Setting the time and date
- General information
- Setting up the TV Guide On Screen System
- Finalize set-up
- The TV Guide On ScreenSystem
- The ' LISTINGS ' screen
- The ' SORT ' screen
- The ' SCHEDULE ' screen
- The ' MESSAGES ' screen
- The ' PROMOTIONS ' screen
- The ' SETUP ' screen
- General
- The Time shift Buffer
- Manual recordings
- Recording from a video recorder/DVD player
- Recording from a camera connected to the front jacks
- General
- Programming recordings with the 'TV Guide On Screen system'
- Programming recordings with the VCR Plus+ ® System
- Programming recordings without the VCR Plus+ ® System
- How to change or delete a programmed recording (TIMER)
- Cancel a programmed recording in progress
- General
- Additional playback features
- The media browser
- Edit title
- Editing recorded titles (name)
- Divide title
- Delete titles/recordings from the HDD
- Insert/remove chapter markers
- Hide chapters (sections)
- Archiving (storing) titles on a DVD+RW/+R
- Protect disc against accidental recordings
- General notes on playback
- Inserting a disc
- Playing a DVD video disc
- Playing a DVD+RW/ +R disc
- Playing an audio CD
- Playing an MP3 CD
- Playing a (Super) Video CD
- General
- Searching a disc
- Still picture
- Slow motion
- Search by time
- ENGLISH Additonal playback features 51 Repeat/Shuffle play
- Scan feature
- Camera angle
- Zoom feature
- Select the audio language
- Subtitles
- General
- Favorite Scene Selection
- Editing recording titles (name)
- Playing the entire title
- Erasing recordings/titles
- Disc settings
- General information
- Adding a disc to the Disc Manager
- Removing discs from the Disc Manager
- Disc Manager (DM) 60 Searching for a title in the Disc Manager
- Searching discs
- General
- Toolbar
- ' Audio '
- ' Zoom '
- ' Time search '
- ' Subpictures '
- Preferences
- ' Record mode '
- ' Camera mode '
- ' Chapters '
- ' HDD buffer '
- ' Language '
- ' Filter '
- ' Set up '
- ' Auto delete '
- ' Jump forward '
- ' Jump back '
- ' Installation '
- ' Flush Buffer '
- General
- Picture settings
- Sound settings
- Language settings
- Additional settings
- Disk feature menu
- Child lock (DVD and VCD)
- Parental level control (DVD video only)
- Changing the PIN code
- Symbols in the menu bar
- Field for temporary messages
- Status field
- The symbols on your DVD recorder display
- Messages in the DVD recorder display
17
Initial installation
After you have successfully connected the DVD Recorder and other
devices to your TV (as described in the previous chapter), this chapter
will help you start the initial installation. The DVD Recorder
automatically seeks and stores all available TV channels.
Switching on additional devices
If you have connected additional devices (satellite receiver,...) via the antenna
cable, switch them on now. The automatic channel search will recognize
them and save them. Please observe that you must switch on a "test signal"
for some additional devices.
No antenna connected
If you are only using the DVD Recorder as a playback device or you only
have a satellite receiver connected, you still need to perform the initial
installation. This is necessary so the basic settings can be saved correctly.
After the initial installation is completed once, you can use the DVD
Recorder normally.
1 Press STANDBY-ON m on the front of the DVD-recorder
P 'PHILIPS' and then 'IS TV ON?' will appear on the display.
P If the connection was properly made and your TV was
automatically switched to the channel number for the
input jack, e.g. 'EXT', '0', 'AV', you will see the following
picture:
Initial Setup
Menu Language
English
Español
Français
Press OK to continue
a My screen is empty.
b Depending on the initialisation procedure it can take some time
before the picture appears. Please press no button in the
meantime.
b If the TV set does not automatically switch to the program number of
the input jack, select the corresponding program number on your TV
set manually (see your TV's operating instructions).
b If your TV set is connected with the antenna cable only, you have to
select on the TV the right TV channel for the DVD-Recorder. (channel
3or4)
b If you use the the 'Progressive scan' connection, you must switch the
'Component Video output' of the DVD Recorder and, if necessary,
the 'Component Video input' of the TV to 'Progressive scan'.
To switch the DVD-Recorder to Progressive scan, hold down N on
the DVD Recorder while reconnecting the power cord. 'PRO'
(progressive scan) will appear on the display.
2 Select the desired language for the on-screen menu by pressing
B or A .
Initial Setup
Menu Language
English
Español
Français
Press OK to continue
What is an on-screen menu?
All settings and/or functions are displayed on your TV screen in one of
the available languages (English, French, or Spanish).
3 Confirm with OK .
4 Select the desired audio language using B or A .
Initial Setup
Audio Language
English
Español
Français
Português
Italiano
Press OK to continue
What is the audio language?
The DVD will play the sound in the language you select, provided this
language is available on the disc. If it is not available on the disc the first
language on the DVD will be used instead. The DVD Video Disc menu,
if available, will also be displayed in the language you select.
5 Confirm with OK .
6 Select the desired language for the subtitles by pressing B or
A .
Initial Setup
Subtitle Language
English
Español
Français
Português
Italiano
Press OK to continue
Installation