DVD Recorder User Manual
Table Of Contents
- Functioning of the device
- Overview of functions 2 The remote control
- Front of the device
- Back of the device
- Discs you can use
- Regional code
- Technical data
- Accessories
- Important
- Symbols used in these operating instructions
- Cleaning the discs
- Special functions of your DVD recorder
- Preparing the remote control for operation
- Connecting to the antenna
- Connecting to the TV
- Connecting to the AC-outlet
- Connecting a video recorder, DVD player.
- Connecting a cable box with cinch or S-video cable
- Connecting a cable box only via antenna cable
- Connecting a camcorder to the front jacks
- Connecting audio devices to the analog audio jacks
- Connecting audio devices to the digital audio jacks
- Initial installation
- Tuner mode
- Automatic TV channel search
- Adding and clearing TV channels manually
- Setting the language
- Setting the time and date automatically
- Setting the time and date
- General information
- Setting up the TV Guide On Screen System
- Finalize set-up
- The TV Guide On ScreenSystem
- The ' LISTINGS ' screen
- The ' SORT ' screen
- The ' SCHEDULE ' screen
- The ' MESSAGES ' screen
- The ' PROMOTIONS ' screen
- The ' SETUP ' screen
- General
- The Time shift Buffer
- Manual recordings
- Recording from a video recorder/DVD player
- Recording from a camera connected to the front jacks
- General
- Programming recordings with the 'TV Guide On Screen system'
- Programming recordings with the VCR Plus+ ® System
- Programming recordings without the VCR Plus+ ® System
- How to change or delete a programmed recording (TIMER)
- Cancel a programmed recording in progress
- General
- Additional playback features
- The media browser
- Edit title
- Editing recorded titles (name)
- Divide title
- Delete titles/recordings from the HDD
- Insert/remove chapter markers
- Hide chapters (sections)
- Archiving (storing) titles on a DVD+RW/+R
- Protect disc against accidental recordings
- General notes on playback
- Inserting a disc
- Playing a DVD video disc
- Playing a DVD+RW/ +R disc
- Playing an audio CD
- Playing an MP3 CD
- Playing a (Super) Video CD
- General
- Searching a disc
- Still picture
- Slow motion
- Search by time
- ENGLISH Additonal playback features 51 Repeat/Shuffle play
- Scan feature
- Camera angle
- Zoom feature
- Select the audio language
- Subtitles
- General
- Favorite Scene Selection
- Editing recording titles (name)
- Playing the entire title
- Erasing recordings/titles
- Disc settings
- General information
- Adding a disc to the Disc Manager
- Removing discs from the Disc Manager
- Disc Manager (DM) 60 Searching for a title in the Disc Manager
- Searching discs
- General
- Toolbar
- ' Audio '
- ' Zoom '
- ' Time search '
- ' Subpictures '
- Preferences
- ' Record mode '
- ' Camera mode '
- ' Chapters '
- ' HDD buffer '
- ' Language '
- ' Filter '
- ' Set up '
- ' Auto delete '
- ' Jump forward '
- ' Jump back '
- ' Installation '
- ' Flush Buffer '
- General
- Picture settings
- Sound settings
- Language settings
- Additional settings
- Disk feature menu
- Child lock (DVD and VCD)
- Parental level control (DVD video only)
- Changing the PIN code
- Symbols in the menu bar
- Field for temporary messages
- Status field
- The symbols on your DVD recorder display
- Messages in the DVD recorder display
47
General notes on playback
With this DVD recorder you can play back the following systems:
•) DVD Video
•) (Super)Video CD Disc
•) DVD+RW Disc
•) DVD+R Disc
•) DVD-RW (video mode, finalized)
•) DVD-R
•) CD-R
•) CD-RW
•) Audio CD
•) MP3-CD
You can operate the video recorder using the remote control or the
buttons on the front of the DVD recorder.
a The display will read 'PIN'
b The child lock has been activated for the inserted disc. Read the sections
on 'Child lock' and 'Releasing a disc' in the chapter on 'Access control
(child lock).
a The menu on the screen is showing an 'X'
b Some DVD discs can be manufactured so that certain steps are required
before the disc can be played, or so that only limited operation is possible
during playback. When an 'X' appears on the screen the selected feature
is not possible.
a The screen is showing regional code information
b Since DVD films are not normally released in all parts of the world at the
same time, all DVD players have a specific regional code. Discs can be
given a regional code. If the regional codes differ between the player and
the disc, playback is not possible.
b The regional code is shown on the label on the back of the machine.
b The regional code does not apply to recordable DVDs.
a I can see the message 'EMPTYDISC'
b The disc does not contain any recordings.
a 'DISC ERROR' will appear on the display
b Recording could not be completed correctly because of a disc error. Check
the disc and clean it if necessary.
a A dialog box appears asking you whether you want to delete
the contents or eject the disc
b The disc inserted is a DVD+RW but its contents are not DVD
video-compatible (e.g. a data disc). Recordings on this disc can only be
made if the entire disc is first deleted with the REC/OTR n button.
Switch over to the actual TV channel during
playback
As soon as you turn on the DVD recorder, the currently selected TV
channel on the DVD-Recorder is recorded in a temporary storage
(Time shift Buffer).
Recordings in the time shift buffer will be automatically deleted e.g.
after 3 hours if the period of the time shift buffer is set to 3 hours
(factory setting).
You can play back a disc, while the current TV show is still being
recorded.
1 To interrupt playback from a disc, press TUNER
P You will see the TV-show from the selected TV channel on
the DVD-recorder
O To continue playback, from the disc press DISC MENU .
Inserting a disc
1 Press the OPEN/CLOSE J button on the front.
OPENING P01
P The disc tray will open. While the disc tray is opening, the
display shows 'OPENING' and then 'TRAY OPEN' when the tray
is fully open.
2 Carefully place the disc in the tray with the label facing up and
press PLAY G or OPEN/CLOSE J .
P 'CLOSING' and then 'READING' will appear in the display. The
information on the disc will be read.
How do I insert a double-sided DVD?
Double-sided discs do not have labelling over the whole surface. The
labelling for each side is in the centre of the disc. To play a side its label
must be facing up.
Opening/closing the tray using the remote control
You can open and close the disc tray using the remote control.
Press and hold the STOP h button on the remote control until the
dialog box shows 'OPENING'or'CLOSING'.
Playback from a disc