DVD Recorder User Manual
Table Of Contents
- Functioning of the device
- Overview of functions 2 The remote control
- Front of the device
- Back of the device
- Discs you can use
- Regional code
- Technical data
- Accessories
- Important
- Symbols used in these operating instructions
- Cleaning the discs
- Special functions of your DVD recorder
- Preparing the remote control for operation
- Connecting to the antenna
- Connecting to the TV
- Connecting to the AC-outlet
- Connecting a video recorder, DVD player.
- Connecting a cable box with cinch or S-video cable
- Connecting a cable box only via antenna cable
- Connecting a camcorder to the front jacks
- Connecting audio devices to the analog audio jacks
- Connecting audio devices to the digital audio jacks
- Initial installation
- Tuner mode
- Automatic TV channel search
- Adding and clearing TV channels manually
- Setting the language
- Setting the time and date automatically
- Setting the time and date
- General information
- Setting up the TV Guide On Screen System
- Finalize set-up
- The TV Guide On ScreenSystem
- The ' LISTINGS ' screen
- The ' SORT ' screen
- The ' SCHEDULE ' screen
- The ' MESSAGES ' screen
- The ' PROMOTIONS ' screen
- The ' SETUP ' screen
- General
- The Time shift Buffer
- Manual recordings
- Recording from a video recorder/DVD player
- Recording from a camera connected to the front jacks
- General
- Programming recordings with the 'TV Guide On Screen system'
- Programming recordings with the VCR Plus+ ® System
- Programming recordings without the VCR Plus+ ® System
- How to change or delete a programmed recording (TIMER)
- Cancel a programmed recording in progress
- General
- Additional playback features
- The media browser
- Edit title
- Editing recorded titles (name)
- Divide title
- Delete titles/recordings from the HDD
- Insert/remove chapter markers
- Hide chapters (sections)
- Archiving (storing) titles on a DVD+RW/+R
- Protect disc against accidental recordings
- General notes on playback
- Inserting a disc
- Playing a DVD video disc
- Playing a DVD+RW/ +R disc
- Playing an audio CD
- Playing an MP3 CD
- Playing a (Super) Video CD
- General
- Searching a disc
- Still picture
- Slow motion
- Search by time
- ENGLISH Additonal playback features 51 Repeat/Shuffle play
- Scan feature
- Camera angle
- Zoom feature
- Select the audio language
- Subtitles
- General
- Favorite Scene Selection
- Editing recording titles (name)
- Playing the entire title
- Erasing recordings/titles
- Disc settings
- General information
- Adding a disc to the Disc Manager
- Removing discs from the Disc Manager
- Disc Manager (DM) 60 Searching for a title in the Disc Manager
- Searching discs
- General
- Toolbar
- ' Audio '
- ' Zoom '
- ' Time search '
- ' Subpictures '
- Preferences
- ' Record mode '
- ' Camera mode '
- ' Chapters '
- ' HDD buffer '
- ' Language '
- ' Filter '
- ' Set up '
- ' Auto delete '
- ' Jump forward '
- ' Jump back '
- ' Installation '
- ' Flush Buffer '
- General
- Picture settings
- Sound settings
- Language settings
- Additional settings
- Disk feature menu
- Child lock (DVD and VCD)
- Parental level control (DVD video only)
- Changing the PIN code
- Symbols in the menu bar
- Field for temporary messages
- Status field
- The symbols on your DVD recorder display
- Messages in the DVD recorder display
75
PROBLEM SOLUTION
Missing or wrong TV
channels
bWrong cable connection selected
The cable box do not
always react to the IR
Blaster
bThe Infrared (IR) Remote control signal interfere with the IR signal of the IR Blaster
Put the IR Blaster closer to the front of the cable box.
In the TV Guide On
Screen
™
'LISTINGS'
screen, I see too many
or too less TV
Channels
bThe number of TV channels depends on the setting in the TV Guide On Screen
™
sytem settings.
If you have a cable box installed (cable box 'YES'), then you should switch on the available channels
(Channels above 125).
bIf you have no cable box installed (cable box 'NO'), then you should switch off the channels which are not
available.
My cable box does not
react on the remote
control from the cable
box or automatically
switches through the
channels
bIf the DVD-Recorder is switched off ( STANDBY m button) the cable box will be used from the TV Guide
On Screen
™
system via the DVD-Recorder. If you want to watch TV-Channels from the cable box, you have to
switch the DVD-Recorder on.
Then you can select the TV Channels with the remote control from the DVD-Recorder or from the cable box.
There is picture or
sound interference on
TV reception:
bBefore recording, select the recording mode as described in chapter 'Manual Recording', section 'Selecting the
recording mode (quality)'.
bChange the channel of the modulator. During standby hold on the remote the button 3 pressed to switch to
channel 3. With button 4 you switch to channel 4.
bHave your antenna checked.
Distorted sound
coming from a
connected hi<fi
amplifier
bThe DVD recorder is connected to the 'Phono-input' of your amplifier: This jack is provided only for a record
players without a preamplifier. Select a different audio input.
The picture is
distorted or
black<and<white during
playback
bThe TV system of the disc does not match that of your TV set (PAL/NTSC).
bThe recording can be made in color only when the TV channels or the connected additional device send a
color signal. Black-and-white signals containing no color information (color subcarriers) cannot be recorded.
No sound signal at the
digital output
bCheck whether the sound settings match the selected inputs and connected additional devices. For more
information, see section 'Sound setting' in chapter 'User preferences'.
There could be
difference in the
search speed of a DVD
and DVD+RW
bDepending on the different structure of a DVD and a DVD+RW/+R this can lead to the different search
speeds. This is not a fault in your machine.
Before you call an engineer