DVD Recorder User Manual
Table Of Contents
- Functioning of the device
- Overview of functions 2 The remote control
- Front of the device
- Back of the device
- Discs you can use
- Regional code
- Technical data
- Accessories
- Important
- Symbols used in these operating instructions
- Cleaning the discs
- Special functions of your DVD recorder
- Preparing the remote control for operation
- Connecting to the antenna
- Connecting to the TV
- Connecting to the AC-outlet
- Connecting a video recorder, DVD player.
- Connecting a cable box with cinch or S-video cable
- Connecting a cable box only via antenna cable
- Connecting a camcorder to the front jacks
- Connecting audio devices to the analog audio jacks
- Connecting audio devices to the digital audio jacks
- Initial installation
- Tuner mode
- Automatic TV channel search
- Adding and clearing TV channels manually
- Setting the language
- Setting the time and date automatically
- Setting the time and date
- General information
- Setting up the TV Guide On Screen System
- Finalize set-up
- The TV Guide On ScreenSystem
- The ' LISTINGS ' screen
- The ' SORT ' screen
- The ' SCHEDULE ' screen
- The ' MESSAGES ' screen
- The ' PROMOTIONS ' screen
- The ' SETUP ' screen
- General
- The Time shift Buffer
- Manual recordings
- Recording from a video recorder/DVD player
- Recording from a camera connected to the front jacks
- General
- Programming recordings with the 'TV Guide On Screen system'
- Programming recordings with the VCR Plus+ ® System
- Programming recordings without the VCR Plus+ ® System
- How to change or delete a programmed recording (TIMER)
- Cancel a programmed recording in progress
- General
- Additional playback features
- The media browser
- Edit title
- Editing recorded titles (name)
- Divide title
- Delete titles/recordings from the HDD
- Insert/remove chapter markers
- Hide chapters (sections)
- Archiving (storing) titles on a DVD+RW/+R
- Protect disc against accidental recordings
- General notes on playback
- Inserting a disc
- Playing a DVD video disc
- Playing a DVD+RW/ +R disc
- Playing an audio CD
- Playing an MP3 CD
- Playing a (Super) Video CD
- General
- Searching a disc
- Still picture
- Slow motion
- Search by time
- ENGLISH Additonal playback features 51 Repeat/Shuffle play
- Scan feature
- Camera angle
- Zoom feature
- Select the audio language
- Subtitles
- General
- Favorite Scene Selection
- Editing recording titles (name)
- Playing the entire title
- Erasing recordings/titles
- Disc settings
- General information
- Adding a disc to the Disc Manager
- Removing discs from the Disc Manager
- Disc Manager (DM) 60 Searching for a title in the Disc Manager
- Searching discs
- General
- Toolbar
- ' Audio '
- ' Zoom '
- ' Time search '
- ' Subpictures '
- Preferences
- ' Record mode '
- ' Camera mode '
- ' Chapters '
- ' HDD buffer '
- ' Language '
- ' Filter '
- ' Set up '
- ' Auto delete '
- ' Jump forward '
- ' Jump back '
- ' Installation '
- ' Flush Buffer '
- General
- Picture settings
- Sound settings
- Language settings
- Additional settings
- Disk feature menu
- Child lock (DVD and VCD)
- Parental level control (DVD video only)
- Changing the PIN code
- Symbols in the menu bar
- Field for temporary messages
- Status field
- The symbols on your DVD recorder display
- Messages in the DVD recorder display
76
PROBLEM SOLUTION
A DVD+RW disc
cannot be played on
certain DVD players
bIf a recording is too short, it is possible that a DVD player cannot detect it: Please observe the following
'Minimum recording times':
Recording mode 'M1': 5 minutes, 'M2': 10 minutes, 'M2x': 13 minutes, 'M3': 15 minutes, 'M4': 20 minutes,
'M6': 30 minutes, 'M8': 30minutes,
bSome DVD players cannot play back DVD+RW recordings. You can solve this problem by using a special
function:
1 Open the disc tray with OPEN/CLOSE J . Insert the disc but do not close the tray.
2 Hold down the number button 2 on the remote control until the tray closes. The disc is
modified.
3 You can restore the disc to its original condition by pressing 1 .
Warning!
There is a risk that you can no longer play the disc on other DVD players after this procedure.
Therefore, apply this function with particular care.
Other disc errors
(DVD+RW)
bIf it is impossible to play back a disc, you can try and repair it for new recordings using the following function.
This will only prepare the disc for erasing. It will not be erased, however, until the recording has been
completed.
1 Clean the disc
2 Open the disc tray with OPEN/CLOSE J . Insert the disc but do not close the tray.
3 Hold down the red function button on the remote control until the tray closes. The disc is
prepared for erasing.
4 Start recording as with an empty disc.
Other disc errors
(DVD+R), 'Disc
contains unknown
data' interruption of a
recording (power
outage)
bThis message may appear if you instert a DVD+R that was not finalized or an error occurs during the
recording. DVD+R's that have not been finalized are very sensitive to fingerprints, dust, or dirt. This may
cause problems during recording.
To use the disc again, follow the next steps
1 Make sure that the surface of the disc is clean.
2 Open the disc tray with OPEN/CLOSE J . Insert the defect DVD+R but do not close
the tray.
3 Hold down 5 on the remote control until the tray closes. The disc will be read ('READING'
appears on the display) and the DVD recorder will start the repair process. This may take up
to four times as much time as the recording, in which the error occurred.
4 If the disc is recovered, the index screen will appear.
Please observe the following:
The recovering procedure is successfully only if there was a previous recording on the disc.
Error during recording: The title may be missing.
Error while changing the title/index picture: The original title/index picture may be visible.
Error while finalizing: The disc appears not to have been finalized.
The index screen
flickers when a DVD+R
is inserted
bYou can finalize the disc using the following function:
1 Open the disc tray with OPEN/CLOSE J . Insert the defect DVD+R but do not close
the tray.
2 Hold down 4 on the remote control until the tray closes.
'FINALIZING' appears in the display. Finalizing begins. This may take up to three minutes.
3 If finalizing has been successful, the index screen will appear.
ENGLISH