User Guide

11
English
Navigating the menu
On the display you can select and set the wake-up profile, bedside light,
settings, sound (source) or the unwind program.
You can change all personalized settings and profiles at any time. After you
have completed a desired setting or profile, don't forget to press the check
mark button to store it permanently in the memory.
Note: The personalized settings and profiles will not be lost if the adapter is
removed from the electrical outlet.
Note: If the display is blank, move your hand towards the lower part of the
Sleep & Wake-Up Light to show the display menu. You will see the menu
buttons.
Setting wake-up profiles
Press the Wake-up/Alarm icon to start setting a wake-up profile.
Note: Press and hold the alarm button for 1 second to deactivate all set alarms
at once.
You can set two different wake-up profiles. For each profile you can set the
alarm time, the light intensity, the wake-up curve duration, and the type of
wake-up sound and its volume.
Note: The set alarm will automatically go off at the same time every day until
you deactivate the alarm by first pressing the alarm toggle icon and then the
deactivate alarm icon to deactivate the alarm.
Light intensity of the wake-up profile
The lamp of the appliance simulates a sunrise. Like a sunrise, the brightness of
the lamp increases gradually. During this wake-up curve, the color of the light
changes from soft red to warm orange to bright yellow.
Press icon on the display to choose one of the 25 light intensity levels.
Note: The main display of the appliance shows if the alarm has been set.
Duration of the wake-up profile
Press this icon to open the menu.