User Guide

14
English
1 Press the toggle icon to choose one of the three sounds options: natural
sounds, radio or no sound.
2 Press the natural sounds icon to select one of the natural sounds or press
the radio icon to select one of the radio presets.
3 You can set the volume with the loudspeaker icon .
Remove a wake-up profile
Press this icon to change the alarm. To remove a wake-up profile, press .
Time + alarm back-up
In the event of a power failure, all functions of the appliance, including the
display, do not work. However, the internal clock and a back-up alarm remain
active for at least 8 more hours.
If during the power failure the set alarm time is due, a back-up alarm goes off
generating a beeping sound for approximately 1 minute.
Snoozing
When the wake-up curve has ended (when the set maximum light intensity has
been reached) and the alarm sound is playing, you can tap the top of the
appliance to snooze.
The lamp stays on, but the sound is muted. The snooze duration can be
adjusted in the app. The default snooze duration is 9 minutes. After 9 minutes,
the alarm sound starts playing again.
Note: The light and sound automatically turn off 60 minutes after the alarm has
gone off or 60 minutes after the last snooze action.
Dismissing the alarm
When the wake-up curve is active or the alarm goes off, you can dismiss it by
pressing this icon on the appliance. If you dismiss it, this alarm profile is
deactivated for that day.
Using the appliance as a bedside lamp
You can use the connected Sleep & Wake-Up Light as a bedside lamp.
Press the bedside lamp icon on the display to switch on the bedside lamp.
Note: You can increase and decrease the brightness intensity. You can select a
brightness between 1 (low) and 25 (high). The default brightness setting is 20.