User Manual

13
English
Setting wake-up profiles
In your wake-up profile on the appliance you can set the alarm time, the
maximum light intensity and type of wake-up sound you prefer. In total you can
set two different wake-up profiles in the menu of the appliance. With the
SleepMapper app, you can set more wake-up profiles.
Note: The main display of the appliance shows the set alarm time if an alarm is
active.
Note: Press and hold the alarm icon in the main menu to deactivate all set
alarms at once.
1 You can toggle between different wake-up profiles on the appliance by
using the arrow icons .
2 To deactivate the alarm, press the deactivate alarm icon .
3 Press the alarm settings icon to enter the alarm profile set-up menu.
Alarm time and day
In this menu you can change the time by pressing + or -. The alarm will be
automatically repeated every day.
You can select on which day of the week the alarm should go off.
1 Press the calendar icon .
2 The days of the week are indicated by the first letter of the day. When an
alarm is active, the letter is shown brightly. You can toggle between the days
of the week by using the arrow icons.
3 To deactivate the alarm for a certain day, press this icon .When a specific
day is inactive, the letter of that day is only dimly visible.
Light intensity of the wake-up profile
The lamp of the appliance simulates a sunrise. Like a sunrise, the brightness of
the lamp increases gradually. During this wake-up curve, the color of the light
changes from soft red to warm orange to bright yellow.
Press icon on the display to choose one of the 25 light intensity levels.
Duration of the wake-up profile
The default duration of the wake-up curve (brightness increase to the set
maximum light intensity) is 30 minutes. The duration can be changed to your
preference by pressing the icon on the appliance.