Operation Manual

– 10 –
PABX setting
PABX systems are most common in large companies. They provide a kind of internal telephone network. In order to
connect to the public network you must first dial an outside line.
1
4
7
2
5
8
0
3
6
9
#
∗
OK
FUNCTION
Select function 15 by pressing the FUNCTION key and then choosing
number 15.
15 dial mode
OK
FUNCTION
Press the OK key.
DIAL MODE: TONE
Press the CURSOR LEFT or CURSOR RIGHT key to select TONE
or PULSE.
DIAL MODE: PULSE
OK
FUNCTION
Press the OK key.
PABX: NO
Press the CURSOR LEFT or CURSOR RIGHT key in order to switch
to operation on a PABX extension or regular line.
PABX: yes
OK
FUNCTION
Press the OK key.
OUTSIDE LINE: 0
1
4
7
2
5
8
0
3
6
9
#
∗
R
Now enter the key that has to be pressed to obtain an outside line
(outside line access code). This is either
0
, the R key or another
number. Some PABXs need this entry to be deleted with the
CURSOR LEFT key ( ).
OUTSIDE LINE: R
OK
FUNCTION
Press the OK key.
CHECK: YES
OK
FUNCTION
Press OK. Your machine will then check that the outside line can be
obtained.
CHECKING...
... if the check is successful, the following message will appear briefly
in the display:
CHECK OK
... if the check is unsuccessful, the following message will appear
briefly in the display:
CHECK NOT OK
In this instance you will be asked to repeat the entry. Change either
the dial mode or check the key for obtaining an outside line.
However, if you have chosen the correct dial mode as well as the
correct key and this message still appears, delete the key for obtaining
the outside line by pressing the CURSOR LEFT key ( ).