Operation Manual

– 13 –
BASIC
FUNCTIONS
Volume of the ringer
You can adjust the volume of the ringer when the fax machine is in stand-by mode or if it is just ringing. Please note that
different volumes are set in DAY and NIGHT mode (see chapter 4 The fax switch).
Press the CURSOR LEFT or CURSOR RIGHT key. The display
shows the current setting for about three seconds.
RINGER: ßß
Change the volume by pressing the CURSOR LEFT or CURSOR
RIGHT key until the desired volume is achieved.
RINGER: ßßß
Volume of the loudspeaker
You can adjust the volume at any time after having pressed the DIAL or LOUDSPEAKER key.
DIAL
* Press the DIAL or LOUDSPEAKER key.
DIAL NUMBER
Press the CURSOR LEFT or CURSOR RIGHT key. The display
shows the current setting.
SPEAKER: ßß
If you wish to adjust the displayed value, press the CURSOR LEFT
and CURSOR RIGHT keys until the desired volume is achieved.
SPEAKER: ßßß
STOP
Finish your entry by pressing STOP.
15-MAY-99 12:30
* For fax machines without built-in answering device: DIAL key
For fax machines with built-in answering device: LOUDSPEAKER key