Operation Manual

– 17 –

THE FAX

SWITCH

Configuring/checking DAY mode

∗

FUNCTION

Enter function 31.

31 day

FUNCTION

Press the OK key.

fax: quick

With the CURSOR LEFT and CURSOR RIGHT keys you can now

choose between the above mentioned settings.

FUNCTION

To confirm press the OK key.

15-MAY-99 12:30

For units with a built-in answering device the following message also appears:

tam: on/loud

Your answering device will be activated automatically after a large number of rings.

TAM: smart

In case of a phone call, your answering device is activated automatically after the 5th

ringing signal. After the first message left by a caller, the answering device of your

machine is automatically reduced to two rings. After you have listened to your

messages, the next incoming call will again automatically activate the answering

device after five rings.

You are able to check remotely whether new messages have been left on your

answering device (if your answering device activates after two rings you know right

away that new messages have been left). This configuration is especially

advantageous when you are e.g. on holiday or on a business trip.

tam: off

Your answering device is switched off.

You can select one of the automatic answering device modes

described above with the CURSOR LEFT/CURSOR RIGHT keys.

TAM: smart

FUNCTION

To confirm your settings, press the OK key.

15-MAY-99 12:30

You can receive a telephone call on the additional telephone even after the built-in answering device has already been

activated. If you have a serial connection, the built-in answering device is automatically switched off after lifting the

handset of the other telephone. If your connection is parallel, you can switch off your outgoing message by pressing the

∗

key twice.