Operation Manual

– 20 –
5 The telephone
Making a call
1
4
7
2
5
8
0
3
6
9
#
Dial the desired number. If you enter a wrong digit, delete it using the CURSOR LEFT key ( ). Lift
the handset. The fax machine will dial. During the call, the call duration appears on the display after
about 10 seconds.
If, after dialling, you hear the dial tone instead of a ringing tone, change the dial mode
setting by selecting function 15.
Redial
You can redial the last five numbers dialled simply by pressing one button.
Press the REDIAL key repeatedly until the desired number is shown on the display. Lift the handset.
Your machine will automatically dial the last number shown.
Caller ID (Identity of the caller—not available in all countries)
Your fax machine is capable of showing the caller’s identity (telephone number) on the display of your fax machine, before
you lift the handset. To have this feature at your disposal you must subscribe to it via your telephone service provider.
Please note that the Caller ID feature is not supported by all providers.
If you have connected an additional telephone to your fax machine which is also
equipped with the Caller ID function, the identity of the caller will then not be displayed
on the additional telephone but on the fax machine.
Searching through the Caller ID memory
To search through the Caller ID memory press the REDIAL key for at
least two seconds. You will hear a confirmation tone. The display
shows either
the amount of received calls that have not been answered, e.g.
2 new calls
or, if you have answered all your calls, an already existing entry in
your caller’s list will be shown.
1: 12345
For example, two calls have not been answered:
2 new calls
The new entries are marked with a “*". As soon as you have had a
look at them, the “*” disappears. The display shows number and/or
date and time of the received call.
*1: 12345
If you want to make a call and you lift the handset before dialling the desired telephone number you cannot correct wrong
entries with the CURSOR LEFT key any more.