Operation Manual

– 21 –

THE TELEPHONE

If you did not receive the ID information the display will show:

(this occurs if e.g. the caller has an unlisted telephone number)

unknown number

unknown caller

Using the CURSOR LEFT/CURSOR RIGHT key you can now step

through the entries.

*2: 54321

STOP

Press STOP to return to stand-by-mode.

15-MAY-99 12:30

Dialling a telephone number from the call list

The telephone numbers of the last 10 received calls are stored.

Press the REDIAL key for at least two seconds until you hear a

confirmation tone. The latest entry in your caller’s list appears on the

display.

1: 12345

Press the CURSOR LEFT/CURSOR RIGHT key repeatedly until the

desired entry is shown on the display.

4: 67890

Lift the handset. Your fax machine will automatically dial the last entry

shown.

DIALLING...

Deleting entries from the Redial or Caller ID memory

You can as well delete an entry while searching through your Redial or Caller ID memory.

Press the CURSOR LEFT key for at least two seconds.

delete: yes

With the CURSOR LEFT/CURSOR RIGHT key you can now choose

whether you wish to delete one entry or all entries.

delete: no

FUNCTION

Confirm with OK. The display shows for two seconds:

DELETED

Short dial

There are short dialling keys available which you can use to store numbers you dial frequently.

Storing a short dial number with name

Press the SHORT DIAL key for at least two seconds until you hear a

confirmation tone.

choose 0-9

∗

Choose a number from 0–9.

ENTER NAME

If you receive more than ten calls the oldest telephone number is deleted from the Caller ID memory.

In case you are receiving calls from the same telephone number several times, only the latest call will be stored in your

Caller ID memory.