Operation Manual
– 37 –
ADDITTIONAL
FUNCTIONS
8 Additional functions
This chapter explains the additional possibilities and functions of your fax machine.
Copying
You can use your fax machine to make copies of an original. When copying your fax machine switches automatically to
FINE resolution. You may also choose PHOTO resolution when copying photographs or for an even finer definition.
Hold the first page of your document face up. Insert
it into the document feed slot as far as it will go.
DIAL NUMBER
FINE/PHOTO
Choose the desired resolution by pressing the FINE/PHOTO key.
PHOTO DMMFINE
DIAL NUMBER
START
COPY
Press the START/COPY key.
COPYING ...
The page will now be fed into the machine. It will appear at the front of the machine again. At the end of
the copying process wait approximately three seconds until the copy is printed out completely. Then
tear off the copy.
EASY LINK—Setting additional devices
This function enables you to enter three codes. These codes are used when you receive a call on an additional
telephone or wish to transfer a call or fax to your fax machine.
1. Code for starting your fax machine from another telephone (default
∗
5
).
2. serial: Code for transferring a call from another telephone connected serial to your fax machine (default
∗
0
).
Please note that when using this code you have to replace the handset of your additional device after you
have entered the code. See chapter 5 Telephone/Call transfer.
3. parallel: Code for switching off the fax machine from an additional telephone connected in parallel (default
∗
∗
).
For faxes with built-in answering device: This code is also used to switch off the outgoing message if the
answering device is already activated.
To be able to use this function you must set your additional or cordless telephone to tone dialling. If your telephone service
is not compatible with this dialling method and requires pulse dialling, you must temporarily set your additional device to
transmit tone dial signals. Please refer to the operating instructions of your additional device to find out how to make this
temporary adjustment.
If your local copies or received faxes are blank, the document was inserted the wrong way.
If you end the process of copying by pressing the STOP key wait until the document is totally ejected before tearing off the
thermal paper copy.