Operation Manual
– 38 –
Only change the specified codes if absolutely necessary.
1
4
7
2
5
8
0
3
6
9
#
∗
OK
FUNCTION
Select function 34.
34 easylink
OK
FUNCTION
Press the OK key.
fax recept: *5
1
4
7
2
5
8
0
3
6
9
#
∗
Enter a two-character code. The first digit should be a
∗
-character or
a
#
-character. This code is used to start fax reception from an
additional telephone.
fax recept: *6
OK
FUNCTION
Press the OK key.
transfer: *0
1
4
7
2
5
8
0
3
6
9
#
∗
Enter a two-character code. The first digit should be a
∗
-character or
a
#
-character. This code is used with serial-connected telephone to
transfer a telephone call from an additional telephone (or cordless
phone) to your fax machine. Please note that when using this code
you have to replace the handset of your additional device after you
have entered the code.
transfer: *1
OK
FUNCTION
Press the OK key.
rel. line: **
1
4
7
2
5
8
0
3
6
9
#
∗
Enter a two-character code. The first digit should be a
∗
-character or
a
#
-character. This code is used with parallel-connected telephone
to transfer a telephone call to an additional telephone. By entering this
code on the additional telephone you can deactivate your fax machine.
For faxes with built-in answering device: by entering this code, you
can stop the outgoing message of your answering device after it has
already been activated.
rel. line: *2
OK
FUNCTION
Press the OK key.
15-MAY-99 12:30
HELP function
HELP
Briefly press the HELP key. You will receive a printout explaining how
to use the most important functions.
PRINTING ...
Short dial and telephone book list
If you would like to print out a list of all stored short dial and telephone book numbers please proceed as follows:
1
4
7
2
5
8
0
3
6
9
#
∗
OK
FUNCTION
Select function 42.
42 dialling list
OK
FUNCTION
Press the OK key. Your fax machine will then print out the list.
PRINTING ...
Please note that the three Easy Link codes must be different. If you enter the same code more than once, the following
message appears on the display: CODE NOT OK.
Please note that you are not able to transfer a phone call from an additional telephone that is connected parallel unless it is
a fax call.