operation manual

Hair Type Temperature Setting
Coarse, curly, hard-to-straighten Mid to High
Fine, medium-textured or softly waved Low to Mid
Pale, blonde, bleached or color-treated Low
1 Connect the plug to a power supply socket.
2 Set the on/off switch (
) to .
The green power-on indicator ( »
) lights up.
3 Turn the temperature wheel (
) to select a suitable temperature
setting for your hair.
Let the appliance heat up for at least 30 seconds. »
4 If the straightening plates are locked, unlock them (
).
5 Comb your hair and take a section that is not wider than 5cm for
straightening.
6 Place it between the straightening plates (
) and press the handles
together.
7 Slide the straightener down the length of the hair in a single motion
(max. 5 seconds) from root to end, without stopping to prevent
overheating.
8 After 20 seconds, repeat step 7 until you achieve the desired look.
9 To straighten the rest of your hair, repeat steps 5 to 8.
After use:
1 Switch off the appliance and unplug it.
2 Place it on a heat-resistant surface until it cools down.
3 Clean the appliance and straightening plates by damp cloth.
4 Lock the straightening plates (
).
5 Keep it in a safe and dry place, free of dust. You can also hang it with
the hanging loop (
) or store it in the supplied pouch.