User manual
RCD must have a rated residual operating current not higher than
30mA. Ask your installer for advice.
Never block the air grilles.
This appliance is equipped with an overheat protection device. If the
appliance overheats, it switches off automatically. Unplug the appliance
and let it cool down for a few minutes. Before you switch on the
appliance again, check the grilles to make sure they are not blocked
by uff, hair, etc.
Always switch off the appliance before you put it down, even if it is
only for a moment.
Always unplug the appliance after use.
Do not wind the mains cord round the appliance.
Never use any accessories or parts from other manufacturers or that
Philips does not specically recommend. If you use such accessories
or parts, your guarantee becomes invalid.
Do not insert metal objects into the air grilles to avoid electric shock.
Keep the hairdryer clean and free of dust, dirt and styling products
such as mousse, spray and gel.
Do not use the appliance on articial hair.
Do not use the appliance for any other purpose than described in
this manual.
Noise level: Lc= 79 dB(A) for HP4960
Noise level = Lc=80 dB(A) for HP4963/HP4962/HP4961
This Philips appliance complies with all standards regarding
electromagnetic elds (EMF). If handled properly and according to the
instructions in this user manual, the appliance is safe to use based on
scientic evidence available today.
A Concentrator
B Air outlet grille
C Air inlet grille
D Rocker switch with 2 heat/speed settings and off position
E Cool shot button (HP4962 only)
F Volume diffuser (HP4963 only)
-
-
-
-
-
-
-
-
-
-
-
-
ENGLISH 7