ENGLISH 4 HQ460 14
4 ENGLISH Important Read these instructions for use carefully before using the appliance and save them for future reference. C ◗ The appliance is equipped with an automatic voltage selector and is suitable for mains voltages ranging from 100 to 240 volts. ◗ Charge, store and use the appliance at a temperature between 5cC and 35cC. ◗ Do not recharge the shaver in a closed pouch. ◗ Keep the appliance dry. Charging Make sure the appliance is switched off before you start charging it.
ENGLISH C 1 Push the slide pins out of the appliance by means of the slide. C 2 Insert the slide pins into the wall socket. 5 soon as you start charging the empty C ◗ As shaver, the green pilot light goes on. CHARGE 3 Remove the appliance from the wall socket when the battery has been fully charged. Shaving time A fully charged shaver has a shaving time of up to 30 minutes.
6 ENGLISH C C 2 Move the shaving heads quickly over your skin, making both straight and circular movements. Shaving on a dry face gives the best results. Your skin may need 2 or 3 weeks to get accustomed to the Philips shaving system. 3 Switch the shaver off by pushing the on/off slide downwards. 4 Put the protection cap on the shaver every time you have used it, to prevent damage. Trimming For grooming sideburns and moustache. C 1 Open the trimmer by pushing the slide upwards.
ENGLISH 7 your country about the availability of this accessory. You can also clean the shaver in the following way: Every week: shaving unit and hair chamber 1 Switch the shaver off. C 2 Clean the top of the appliance first, using the brush supplied. C 3 Press the release button (1) and remove the shaving unit (2). C 4 Clean the inside of the shaving unit and the hair chamber with the brush. C 5 Put the shaving unit back onto the shaver.
8 ENGLISH Every two months: shaving heads 1 Switch the shaver off. C 2 Press the release button (1) and remove the shaving unit (2). C 3 Remove the retaining frame by pushing the sides of the central spring towards each other (1) and lifting the retaining frame out of the shaving unit (2). C 4 C C Slide the shaving heads out of the retaining frame and clean them one by one. Do not mix up the cutters and the guards.
ENGLISH C 9 7 Slide the shaving heads back into the retaining frame and put the retaining frame back into the shaving unit. 8 Put the shaving unit back onto the shaver. For extra thorough cleaning, clean the shaving heads by putting them in a degreasing liquid (e.g. alcohol) every six months.To remove the shaving heads, follow steps 1 to 4 described above. After cleaning, lubricate the central point on the inside of the guards with a drop of sewing machine oil to prevent wear of the shaving heads.
10 ENGLISH Storage the protection cap on the shaver to C ◗ Put prevent damage. ◗ The appliance can be stored in the pouch supplied. Replacement Replace the shaving heads every two years for optimal shaving results. Replace damaged or worn shaving heads with HQ4« Philips shaving heads only. 1 Switch the shaver off. C 2 Press the release button (1) and remove the shaving unit (2).
ENGLISH 11 C 5 Slide new shaving heads into the retaining frame. C 6 Put the retaining frame back into the shaving unit. 7 Put the shaving unit back onto the shaver. Accessories The following accessories are available: - HQ4« Philips shaving heads. - HQ100 Philips Action Clean (shaving head cleaner). - HQ101 Philips Action Clean refill (shaving head cleaning liquid). - HQ110 Philips shaving head cleaner (shaving head cleaning spray).
12 ENGLISH Disposal of the battery Remove the battery when you discard the appliance. Do not throw the battery away with the normal household waste, but hand it in at an official collection point.You can also take the appliance to a Philips service centre, which will remove the battery for you and will dispose of it in an environmentally safe way. Only remove the battery if it is completely empty. 1 Remove the shaver from the wall socket.
ENGLISH 13 Troubleshooting 1 Reduced shaving performance B Cause 1: the shaving heads are dirty. B The shaver has not been cleaned well enough or has not been cleaned for a long time. ◗ Clean the shaver thoroughly before you continue shaving. See chapter 'Cleaning and maintenance'. B Cause 2: long hairs are obstructing the shaving heads. ◗ Clean the cutters and guards with the brush supplied. See chapter 'Cleaning and maintenance', section 'Every two months: shaving heads'.
14
15 ◗ ◗ c C ◗ ◗ c
16 C 1 C 2 C◗ CHARGE 3 C 1 B
17 C 2 3 C 4 C 1 C◗ B
18 1 C 2 C 3 C 4 C 5 1 C 2
19 C 3 C 4 C 5 C 6 C 7 8
20 1 C 2 C 3 C ◗◗ « 1
21 C 2 C 3 C 4 C 5 C 6 7 «
22 1 C 2 C 3
23 1 B B ◗ B ◗ B 2 B ◗
24 2006/01/04
25
26 4222 002 42286