User manual

Never insert your ngers or an object into the feeding tube.
After you have processed all ingredients and the juice ow has stopped,
switch off the appliance and wait until the lter has stopped rotating.
6 Push the spout upwards to prevent juice from dripping out of the
spout.
Tips
- Use fresh fruit and vegetables, as they contain more juice. Pineapples,
beetroots, celery stalks, apples, cucumbers, carrots, spinach, melons,
tomatoes, pomegranates and grapes are particularly suitable for
processing in the juicer.
- You do not have to remove thin peels or skins. Only remove peels
which you would not eat, e.g. those of oranges, pineapples, kiwis,
melons and uncooked beetroots.
- When you prepare apple juice, remember that the thickness of the
apple juice depends on the kind of apple you use. The juicier the apple,
the thinner the juice. Choose a kind of apple that produces the type of
juice you prefer.
- Apple juice turns brown very quickly. To slow down this process, add a
few drops of lemon juice.
- Fruits that contain starch, such as bananas, papayas, avocados, gs and
mangoes are not suitable for processing in the juicer. Use a food
processor, blender or bar blender to process these fruits.
- Leaves and leaf stalks of e.g. lettuce can also be processed in the juicer.
- Drink the juice immediately after you have extracted it. If it is exposed
to air for some time, the juice loses its taste and nutritional value.
- To extract the maximum amount of juice, always press the pusher down
slowly.
- The juicer is not suitable for processing very hard and/or brous/starchy
fruits or vegetables such as sugar cane.
- Citrus fruits can also be processed with the juicer, remove the white
pith of citrus fruits because it has a bitter taste.
ENGLISH8
Cleaning
Never use scouring pads, abrasive cleaning agents or aggressive liquids
such as alcohol, petrol or acetone to clean the appliance.
The appliance is easier to clean if you do so immediately after use.
1 Switch off the appliance. Remove the plug from the wall socket and
wait until the lter has stopped rotating.
2 Remove the dirty parts from the motor unit. Disassemble the juicer
in the following order:
- Remove the pusher;
- Lower the locking arm to unlocked position;
- Remove the lid;
- Remove the pulp container.
3 Remove the juice collector together with the lter (Fig. 11).
4 Clean the detachable spout with the small side of the brush. Clean all
parts except the motor unit with the cleaning brush in warm water
with some washing-up liquid and rinse them under the tap.
Note: All detachable parts are dishwasher-safe. Place the detachable plastic
parts on the top tray of the dishwasher. Make sure they are placed well away
from the heating element.
5 Clean the motor unit with a damp cloth.
Never immerse the motor unit in water nor rinse it under the tap.
Storage
1 Store the mains cord in the cord storage facility by winding it round
the base of the motor unit.
Environment
- Do not throw away the appliance with the normal household waste at
the end of its life, but hand it in at an ofcial collection point for
recycling. By doing this, you help to preserve the environment (Fig. 12).