operation manual

9
English
EN
Built-in safety lock
This feature ensures that you can
only switch on the appliance if the
blender jar is assembled on the motor
unit properly. If the blender jar is not
correctly assembled, the built-in safety
lock will be locked.
Safety Feature
This blender is tted with a safety feature
which safeguards against excessive
loads. In case of overloading, the blender
automatically activates the protection
and operation will stop and the
overloading symbol will light up on the
control panel. If this occurs, set the rotary
knob to OFF, unplug the appliance and
allow it to cool down for 15 minutes.
Remove the ingredients and clean up
the blender jar before starting operation.
Electromagnetic elds
(EMF)
This Philips appliance complies with all
applicable standards and regulations
regarding exposure to electromagnetic
elds.
Recycling
This symbol means that this product
shall not be disposed of with normal
household waste (2012/19/EU).
Follow your country’s rules for the
separate collection of electrical and
electronic products. Correct disposal
helps prevent negative consequences
for the environment and human health.
product) to remove the
food from the wall.
•
Noise level: Lc = 92 dB(A).
Blender
Warning
•
Never reach into the
blender jar with your
ngers or an object while
the appliance is running.
Caution
•
To prevent spillage,
do not put more than
1.8 litres of liquid in the
blender jar, especially
when you process at a
high speed. Do not put
more than 1 litre in the
blender jar when you
process ingredients that
tend to foam.
•
Do not let the appliance
run for more than
3 minutes at a time. Let
the appliance cool down
to room temperature
before you continue
blending.
•
Always make sure the lid
is properly closed and
assembled on the jar
before you switch on the
appliance.