User Manual

12
EN
Caution
•
The cutting edges are sharp. Be careful when you clean
the blade unit of the food processor, the blade unit of
the blender and the discs.
1
Clean the motor unit with a moist cloth.
2
Clean the other parts in hot water (< 60°C) with
some washing-up liquid or in a dishwasher.
6 Storage
1
Push the power cord into the integrated cord
storage (Fig. 11).
2
Store the product in a dry place.
3
Put the small accessories in the storage tray
(Fig. 12).
Caution
•
Carefully handle the blades and discs during storage.
Make sure that the cutting edges of the blades and
discs do not come into contact with hard objects. This
may cause the blade to get blunt.
7 Guarantee and
service
If you have a problem, need service, or need
information, see www.philips.com/support or
contact the Philips Consumer Care Center in your
country. The phone number is in the worldwide
guarantee leaet. If there is no Consumer Care Center
in your country, go to your local Philips dealer.
Note
• Put the sieve for citrus press on the shaft in the bowl.
Make sure that the projection on the sieve is locked
in the slot of the bowl handle. When the sieve is xed
correctly, you hear a click.
• Press the citrus fruit onto the cone. Stop pressing to
remove the pulp from the sieve if necessary. When
you nish pressing or want to remove the pulp, turn
the knob to speed 0 and remove the bowl from the
appliance with the accessories on it.
• Do not exert too much pressure on the cone when you
press citrus fruits on it
Mill (Speed 2) (HR7520 /
HR7530 only)
Before you start, make sure that you assemble
according to Fig.8.
You can use the mill to chop coee beans,
peppercorns, nuts, herbs, dried fruits etc.
Dried fruits such as gs can be chopped and used
as toppings for yoghurt or spread for your bread or
biscuit.
For best results when processing dried Turkey gs,
use max of 25 g at speed P for 5 seconds.
5 Cleaning
Warning
• Before you clean the appliance, unplug it.